Overview Specification Application Downloads Support

FC53-LC

Overview
  • 1
  • 2
  • 3
  • 4
Specification

Structure

All-metal structure

Printing Method                     

Thermal Transfer Printing

Resolution

300dpi (12 dots/mm)

Printing Speed

40-600mm/s

Printing Width

53mm

Print Area

53mm * 75mm (Intermittent)
53mm * 100mm (Continous)

CPU

32-bit RSIC

Flash Memory

8MB (minimun)

Dynamic Memory

16MB(minumum)

Real-time Clock Function

STD (Battery Lifespan: min 3 years)

Sensor

Ribbon Tension Detection
Thermal Head Position Detection
Cover Open Detection
TPH over Temperature Detection
Ribbon Break Detection

Soft Package Detection

Electromagnetic Induction or Synchronizer

Soft Package Material

PVDC, PET, PE, NY, CPP, OPP, BOPP, BOPET, BOPA, CPP, PE,VMPET, VMCPP and other films and composite films

Capacity for Ribbon Loading                                        

1 "mandrel with a maximum length of 1100 meters                                                     

Ribbon Type

Type: Wax / Resin-based
width: 20 mm (0.79 ") to 55 mm (2.17")

Ribbon Saving

Support interlaced, radial, multiple print signals, digital ribbon saving printing, ribbon back and other ribbon saving modes;
The minimum ribbon interval between two lines of printing is not more than 0.5mm

Air Pressure Supply

Max. 6 bar/90 psl

Airflow Consumption

As low as 4 ml / print at 2.5 bar

Print Density Level

Level 31

USB Interface

STD, 1 port, type B connector, USB device 2.0

USB HOST

STD, 1USB disk connection port ;
USB Host 2.0, automatic detection and setting of connections

Serial Port

STD 1 port, female D-SUB 9-pin connectorDefault 9600, 8/N/1, variable baud rate and format

Ethernet Interface 

STD 1 port, RJ-45 connector, IEEE802.3 10/100BASE-T

Hardware Interface Port

Input: "Print Start" and a configurable input ;
Outputs: fault, warning and 2 configurable outputs

Power Supply

Internal switching power supply module, I / P: AC90V-264V, 47/63 Hz; 150 VA

Software

HPRT Format Designer

Certification

CCC

Environmental Conditions

Operation: 0 to 40 ° C @ humidity 10% to 90% non-condensing
Storage: -40 to 60 ° C @ humidity 10% to 90% non-condensing

Machine Dimension

Printer: height less than 190 mm, width less than 220 mm, depth less than 236 mm
Controller: height less than 170 mm, width less than 263 mm, depth less than 190 mm

Machine Weight

Printer: less than 8 kg ;Controller: less than 5 kg

Warranty

Printer: 3 years ; Controller: 3 years ;
Thermal head: 6 months or 50 KM;Platen: 5 years


Application
Downloads
Support

PRT Products

Products > TTO  Thermal Printers

Send an inquiry

    Please fill in your name,email and requirement